Can any of you guys verify something for me please?
On the PPB 520-5021-05 board there are fuses for the solenoids (F6) and flashers (F7).
When you remove F7 does F6 still have power?
Remember F6 is at the open side of the relay.
In other words, do the coils still work?
Easy to check via the coil test.
I believe there is a design error in this board regarding F7 position.
I know you can't change the fuse from position, but I maybe we can come up with a solution....
Peter
http://www.inkochnito.nl