Quoted from billsfanmd:is there a list of flipper coils by strength? thought I saw it somewhere.
doesnt data east have the coil pulse adjust in menue
think you can set coils to softer pulse to decrease strength.
You're currently viewing posts by Pinsider jorro.
Click here to go back to viewing the entire thread.
Quoted from billsfanmd:is there a list of flipper coils by strength? thought I saw it somewhere.
doesnt data east have the coil pulse adjust in menue
think you can set coils to softer pulse to decrease strength.
Hi guys
Can anyone please tell me
On the x-pin power supply, the 0,5 amp fuse what is all conected to this?
my dmd went out, but even when disconect red/black power conector for dmd
the 0,5 fuse blows on start up.
rest of pin seems to work good.
also posted at jurassic park club
any help apreciated
Quoted from PinballManiac40:If your DMD draws too much current, this 0.5 amp fuse will blow out.
There is a 8 pin connector on the DMD that you would need to remove to see if the 0.5 amp fuse blows out. The 2 pin red/black connector on the DMD controller board is only 5 volts going to that board.
Did you have an original DE power supply in the game? If so, what was it doing?
no i had a rottendog but i changed to xpin
my JP had somethimes in bussy dmd secuences when using 2 right flippers, i had some flickering in dmd images
it looked like a power problem so i changed to xpin powersupply.
but even with all dmd cables unhooked, when i power up imedeatly the 0.5 fuse blows on xpin
and now when placing back in rottendog dmd only gives some static
but there's no blowing 0.5 fuse on rottendog powersupply.
with both bords pinball plays
but with xpin everything seems a little more powerfull/snappy (t-rex,flippers,slings,bumpers etc.)
this is my dmd now
anyone any idea why the 0.5 amp fuse blows, even when dmd not connected?
and why not on the rottendog board?
Quoted from zerbam:my bullwinkle has one and missing one.......it is a clear cover over the credit switches inside the coin door
Picture please
You're currently viewing posts by Pinsider jorro.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/data-east-pinball-club?tu=jorro and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.