Hi Guys,

A little guidance if possible here...

I finally got back my original TFTC which was the first pin I ever owned purchased back in 1997, anyhow other then one or two flaky switches and a sticky upper flipper which a rebuild will address I notice the crypt motor constantly running the tombstone up and down. I first thought that maybe one of the two switches whether up or down might be flaked but they are both registering fine when up & down . Any idea where to look and why it might be doing this?

Thanks

Okay I found three, 1 to each switch and the other to the motor all of which were connected fine.

Here is a link to the video of it, does it even without any game starting.

IMG_4568 (resized).JPG

IMG_4569 (resized).JPG

IMG_4570 (resized).JPG

I'm actually beginning to think that being this happens immediately upon powering on that possibly my Q23 is shorted open. Is there a relay for this motor as well that needs to be checked? I don't see one in the manual but maybe I over looked it?

DE machines always seemed to have a feedback sound hum in them.... or at least the ones I have owned and played.

Have you tried some contact cleaner of the volume pot? does it crackle more or less so as you are adjust the vol level?