WTB: Looking for a left slingshot plastic for a Time Machine.

Thanks,
Alan

Has anyone had any experience with removing a factory mylar from Data East playfields? Thanks.

What machine? What method did you use? Any complications? Loss of graphics, art, etc.?

Parts - Wanted

DE Time Machine: Looking for 2 plastics Archived

Wanted! - “I'm trying to scare up a couple of plastics for my Data East Time Machine. One is the left slingshot plastic and the other is in the upper left area of the playfield. See pic bel...”

2024-01-23

Jarrettsville, MD

Alan_L

Wanted

Archived after: 38 days

Viewed: 242 times

Status: Not sold

Still looking for these two plastics, any luck?

Looking for two actuator levers for a DE microswitch like this:

Marco has the whole assembly, but I just need the rollover wires (acutators).

Thanks for checking.

pasted_image (resized).png

gdonovan, perhaps the wires on your TM are spot welded, but on mine, the wires are just held on with little "ear" clips over the plastic lugs on the microswitch itself, much like many other microswitches. See pic.

20240325_112554 (resized).jpg

As it turns out, the DE switch that I need, 500-5142-00, is NLA anywhere, but there is a Wms. switch that is essentially the same, 5647-12693-19, and is in stock at PBR for $4.38 each.

Is there any way to increase or decrease the frequency of when the Match Feature on my Time Machine is hit? I can find ON/OFF at Adj.22 but no Easy/Factory/Hard setting.

Thanks,

Alan