Following. Please keep us updated as things progress. Good luck!
You're currently viewing posts by Pinsider MurphyPeoples.
Click here to go back to viewing the entire thread.
Quoted from pinballjah:So an update on DMD power issues and game not working. The tech replaced pins 10-12 in CN1 and I bypassed the DMD issue a little. I had bought a LED colordmd for the game and apparently this dmd draws less power than the original. So after installing the color dmd, it appears fine. There was one section of the powerboard that was not drawing enough power when tested. If anyone wants specifics, I can ask the tech for more details.
The game did restart one time during gameplay but that was before replacing the three pins in CN1.
Thanks for all the help getting the game up and running! Jim
I think it would be great to post all the specifics for owners that might have this problem come up in the future. Thanks for keeping us up to date.
Quoted from Inkochnito:It looks like you need to re-position some of the wires.
In which game do you need to use it?
In some cases you need to short the EOS connection.[quoted image]
I think Frank at TNT Amusements did this sometime in the past? You might want to call them and ask. They've been known to build modifications for DE games.
Quoted from cleland:Plus 1 on this request. A friend of mine just picked up his first game, a The Simpsons .
The Playfield is in OK shape, but it has the typical playfield wear around the flipper and inlane/outlane area, with some pretty bad touchup. Does anyone sell a decal or have a scan of this area?
I was thinking of printing a high quality sticker (Similar to what has been done with The Flintstones ) and putting mylar over it.
Also need the left bank target plastic(with ball deflector), left lane guide plastic, and Cooling Tower Pop Bumpers (original design).
[quoted image]
I’m up for a sticker too. Also need it in upper right at more bar.
You're currently viewing posts by Pinsider MurphyPeoples.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/data-east-pinball-club?tu=MurphyPeoples and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.