Hi. Working on dales 6 shooter game.Question is this, when I move the gun to shoot at targets, the gun movement adds to the score without hitting a target I don't have the wiring diagram. Any help to what to look for is appreciated. Thanks Tom
1472691501752-963850786 (resized).jpg
1472691528865-1582346618 (resized).jpg
1472691567926-2092284763 (resized).jpg
Last pic has loose wire, I resodered it , but if a bad contact will it cause it to score every time I move the gun? Thanks tom
I don't know much about the old Dale gun games. Does it have a trigger relay? If so, there should be a switch on that relay that closes when the trigger relay energizes to provide power to the rivet board. If there is such a switch, and it's out of adjustment such that it is closed all the time, then moving the gun around would add score without using the trigger.
- TimMe.
Quoted from TimMe:I don't know much about the old Dale gun games. Does it have a trigger relay? If so, there should be a switch on that relay that closes when the trigger relay energizes to provide power to the rivet board. If there is such a switch, and it's out of adjustment such that it is closed all the time, then moving the gun around would add score without using the trigger.
- TimMe.
will check , thanks im kind of blind folded have to unscrew the relays in back to look thanks for a starting point, Tom
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dales-6-shooter-help and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Pawling, NY