Quoted from pindude80:

Cool!! Which version are you getting? When did you place your order? Who did you order through?

Quoted from DeeGor:

Double flip to cancel the multiball. This will allow you to lock another ball and start a 3 ball multiball. Additionally, you can shoot the phone scoop three times and add a ball during multiball.

Quoted from DeeGor:

As soon as multiball as ready, look at the phone display, and you will see a message that says something along the lines of "double flip both flippers to disable." This option is only available when you first have multiball ready. If you lose the current ball, and start a new one, multiball will be ready, but you will lose the option to disable it.

Quoted from LTG:

Try more power, then less power, then this - http://www.pinplay.com/5/adjusting_the_ball_trough_on_woz.html

See picture - if it's sticking. Or the axle with the big C clip, lightly grease or oil the moving parts on the other side of that C clip and work the mech up and down a few times so it operates smoothly.
LTG : )

Quoted from PinMonk:

Sure thing. This is just a piece of PET-G I had laying around from The Shadow. Once I establish it works, I'll make a legit one that will cover from the Station exit to the Crazy Bob sign. The gap that's there now is high enough that an airball is unlikely in that area, so I'm not worried. So far, so good.
The two crazy bob sign feet that had to be moved to angle the sign are just held on with 3M double sided adhesive tape so this can be reversed if need be (I can't imagine wanting the stock way again, though).

Quoted from check_switch_26:

Except that wasn't a "shipped" game. It was a show demo, and I personally installed 1.45 on it in order to test the release. The game was sold after Expo.
Update on 1.45: This version will not be released for general consumption. I'm working on some bugs that were found in the last 1.5 weeks. Stay tuned for 1.46, which I hope to have available soon.