I have my cyclone pinball game and have 2 switches that aren't working. I'm thinking they could be one problem. The first switch is the ghost drop down target in the front of the ramp, and the 2nd is when you loose the ball. It registers that you lost the ball, but doesn't kick the ball out for the next ball. They are close together and I believe it's the same wires. I checked all fuses and they all seem ok. What should I check with my voltmeter. (I'm kinda new to this part) What settings should it be on and exactly what should I be checking. It could be the coil, but when it's 2 things.... I'm thinking its one problem. Any help would be greatly appreciated. Thanks!