Red stripe of ribbon cable to pin 1 of the board on *both* sides.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
You're currently viewing posts by Pinsider borygard.
Click here to go back to viewing the entire thread.
Red stripe of ribbon cable to pin 1 of the board on *both* sides.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
Quoted from viperrwk:If it's not passing the on-board diagnostics, there's something wrong with the display itself as those diagnostics work independent of the CPU board. Contact Brett @ X-Pin: http://xpinpinball.com/pdf/Support%20FAQ_3.pdf
viperrwk
Not necessarily. The display still needs the strobe signal from the CPU for the diagnostics to work.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
You're currently viewing posts by Pinsider borygard.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cyclone-display-issue-please-help-1?tu=borygard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.