You're currently viewing posts by Pinsider Houkaka.
Click here to go back to viewing the entire thread.
It's working! 1 digit is down but, eh, I can play again! Few month's back I've made a mistake by replacing the ribbon cable upside down on the board... Anyway, thank's for the help .
Just one last question, is it possible to save highscores and if the battery have something to do with it?
Quoted from markmon:Since this is sorted, can someone tell me when the drop target in the center should be raised or lowered?
From what I know, it should be lowered when you hit it , then the machine will enter in what I call the mystery mode (don't know if it's the real name) and when the mode end, the target should be raised.
First thing to do is swap the ends on the ribbon cable to the display and see if different portions of the display go out. It looks like the adhesive on the standoffs has failed and the displays are hanging by only the solder joints - not good.
If ALL the lights under the playfield don't work, you probably have a burnt connector on the GI relay under the playfield. This is located towards the back of the playfield.
viperrwk
This?
how many wires is suposed to be on that connector? because theres only 4 wires and 6 pins
I have a presentation for school in witch I present my machine but I have only 5 days left! so I'm kind in the hurry.
Anyway I'l upload some picture at the end of the presentation day
You're currently viewing posts by Pinsider Houkaka.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cyclone-display-and-lamp-problem?tu=Houkaka and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.