Quoted from Mr_Tantrum:Here are some placement ideas for the Cyclone.
[quoted image]
Can you make it “shorter” to cover the shooter gauge? Same length just shorter on the part that goes over the gauge
You're currently viewing posts by Pinsider RazorV23.
Click here to go back to viewing the entire thread.
This topic is linked to a classified ad.
It was generated from this Marketplace listing.
Quoted from Mr_Tantrum:Here are some placement ideas for the Cyclone.
[quoted image]
Can you make it “shorter” to cover the shooter gauge? Same length just shorter on the part that goes over the gauge
Quoted from Mr_Tantrum:If I'm understanding you, I could just cut out a seat or two. I would need the exact measurement that it would need to be. Happy to do it, if you are committed to buy. Please note that the coaster is 1" tall. Would this give you enough clearance under the glass?
Please clarify the following:
length = from front to back (5.75")
width = from left side to right side (2")
height = from bottom to top (1")
I assume by "shorter" you mean to reduce the length, correct?
No I mean shorter in height on only the section on top of the gauge
ETA... looking back on your post, it looks like it’ll fit there already
Quoted from Mr_Tantrum:I currently is 1" tall, so can you slide the glass on currently? Regarding the width that is a small adjustment (I assume it is 1/8" too wide now). For the length, and extra 1-3/4" is quite a bit. Does it have to be that long, or what is the minimum overall length to cover the desired portion of the shooter lane?
I think your designed size will just about fit already. It will need to be 1 7/8” wide thou.
I’ll pm you my details
You're currently viewing posts by Pinsider RazorV23.
Click here to go back to viewing the entire thread.
This topic is linked to a classified ad.
It was generated from this Marketplace listing.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cyclone-comet-coaster?tu=RazorV23 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.