Cyclone
Williams, 1988You're currently viewing posts by Pinsider azdbacker.
Click here to go back to viewing the entire thread.
A little off topic but... My ferris wheel slips. I'm using a new belt and have cleaned everything top to bottom and still, every 5 or 6 games, it will slip >< Anyone here run into this and have a way to make this bulletproof?
Thanks!
Quoted from freddy:use white rubber ring the rubber pulls tighter than the clear nylon i have no issues using the white rings just size it appropriately.
I've read to not do that but if it works, I wouldnt care if it were a fan belt from a clown car. Thanks!
Quoted from PDX_Pinball:The power to the wheel should be the same in test mode as in game play. Do the easy part first, check to see if the mystery wheel is cracked. The pulsating you describe makes me wonder if it isn't getting enough power. What's your comfort level with a DMM to check the voltages on the mystery wheel board?
My wheel was cracked just like this. Repaired with epoxy and fiberglass tape I use for R/C plane repairs. Been this way for over 2 years now. No plans to replace it either.
You're currently viewing posts by Pinsider azdbacker.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cyclone-clubmembers-only?tu=azdbacker and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Mesa, AZ