Does anyone have a resource for a new mystery wheel? The one I have is cracked in the back.
You're currently viewing posts by Pinsider Chalkey.
Click here to go back to viewing the entire thread.
Still can't find one. Some dude on shapeways has the design in his store but it says "not for sale". I asked him for the file in a message but he hasn't gotten back.
Funky display issue. Top segment on bottom two displays was out. Replaced the displays (bottom was also burned) and the problem persisted with the LEDs, but now of the game is cool the segments will work for about a minute and fade out. I verified the wiring and solder end to end for the segment so I think it must be an issue with either the 4.7k sip caps or a chip somewhere getting hot? Anybody ever see anything like this?
Added over 5 years ago:Edit: turned out to be one of the PIAs
Voltages first! Start from power board. Unless something obvious like battery corrosion in which case you'll either need to clean and dig into what components are bad or replace the MPU outright. Good luck!
Undo the two connectors on the back, remove the 4 screws on the circuit board and it pops right out. Really tiny allen screw, dont over adjust.
You're currently viewing posts by Pinsider Chalkey.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cyclone-clubmembers-only?tu=Chalkey and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.