Quoted from marvelusmarvcus:i have started to upgrade my cyclone with leds. after putting leds in the backglass mystery wheel lights, i noticed that the lights do not match up where they should. it appears that the swinging door behind the backglass has some sag in it. i do not see any adjustment i can make to correct the sag. has anyone experienced this issue on this or any other pin?
thank you for the help
You can use a longer screw and washers on the bottom side of the hinge to help raise the backboard, you can also move the latches and stop on your right side to hold up the backbox or put a bend into it (move the top latch back and the bottom stop forward). You just have to use trial and error to make a level adjustment.
Cyclone is a pain due to all the lamps that need to match up....