i have started to upgrade my cyclone with leds. after putting leds in the backglass mystery wheel lights, i noticed that the lights do not match up where they should. it appears that the swinging door behind the backglass has some sag in it. i do not see any adjustment i can make to correct the sag. has anyone experienced this issue on this or any other pin?

thank you for the help

very helpful ideas, thank you

i just wanted to update this thread with my fix in case someone else searches this issue in the future.

there is a vertical phillips screw at the lower left of the swinging door. i removed this screw and added 2 washers to help lift the door up, there were already some washers in place.

put the screw back and problem solved. thanks for the help guys.