Hi All,

I wondered if anyone could help.....playing my CV today and the Ringmaster had a Position Switch problem. This seemed to clear itself, but now the Boom Balloon will not go back down and the auto-plunger will not fire when you have a ball save. The Ringmaster also doesn't always go back to the correct position either.

All was working fine when I played it last

I have gone to the Solenoid Test but nothing happens in the Jet Up/Down for the Boom Balloon. In the Tests menu The Ringmaster does move up and down fine though, but again the Jet Up/Down doesn't do anything.

I've had the table up but is there a manual way of releasing the Boom Balloon so that it can do back down in the playfield?

Not sure where to start with this one.....

Andy

Not sure if these help - back boards....some red lights flashing....

20140302_174337.jpg

And then top light is not on, middle light flashing red very fast, bottom light on red constantly:-

20140302_174400.jpg

Ahhhh simple me....on closer inspection looks like a blown fuse....hopefully this was just causing the problems