I thought it had only been six months, but 11 months after I started experimenting with lock bar engraving, I’ve finally finished a couple. Not going to be cheap at all, but I’m here for the few that want something over the top to go with their HEP restored table. I put the TZ on eBay today and it was up to over $300 within the first couple hours, I’ll be selling them no reserve so the market will determine value. I will however listen to requests and see if anyone interested may want to pay what I need to make sense of this service. I do lots of guns and those can get up in the several hundred and on occasion thousands for the same amount of service, but again, I’ll try to work with anyone interested on getting that one of a kind over the top mod. Message me if you have an idea and I’ll try to get you a price. Please understand that this deep relief engraving is not cheap.. not at all. I do however offer service that is more surface engraving and that starts around $50 per 2x3 size design (or opproximatly). The surface engraving is a single pass of the laser where the deep relief can be 400-600 passes depending on the design. Message me if interested. Thanks
08DCB26A-1822-4664-836D-565F6A145E58 (resized).jpeg
D72904B0-7C1E-4D23-B7F3-AC30A836E3F4 (resized).jpeg
B5859E1D-4C17-421C-AAC8-818756E1998D (resized).jpeg
D0EF94E7-B0BD-424E-ACCF-A055625A5C23 (resized).jpeg
73023D60-6AF3-4D01-8F83-D660553A7ADE (resized).jpeg
165A5F88-AC80-4E8A-A0F4-1D71EB18D8B4 (resized).jpeg
BCB110DB-3847-42D1-8742-0876D95BDB30 (resized).jpeg
18C7783C-09AB-4732-9631-E428A1290CF1 (resized).jpeg
3A9D9333-43BC-40BD-8444-F7097CDC63E6 (resized).jpeg
4FD53A7C-E4B3-4431-8B22-824F76FC8DBC (resized).jpeg
F9B8C18D-A3F0-4C71-9927-C58F8BD1C074 (resized).jpeg
EDF60967-F0FC-43E0-B938-3CB09BCAFA24 (resized).jpeg
EAB486D8-0F24-43F4-955F-9410AFFBF5E5 (resized).jpeg