Well I have alot of extra headroom in my garage so I went and made a custom topper for my AC/DC. It stands 9" vs 6.5" like my others. Its a Gibson SG that Angus uses. If anybody has the headroom like I do and wants one contact me. It is full multi color and the top edge cut off.

Joe

Here is a Father's day deal for 8 people, that's because it's all the acrylic I have in this size.

It measures 24" x 9"
$125.00 + Shipping

Send me a contact through my website, when they are gone I will post back on this thread.

Thanks
Joe

markmon - I have the stands made for me by a machine shop. Which toppers do you have? Due to the new style of toppers the milling of the bases is very tight, the holes on the bottom of the base should be threaded but it takes a little time to get that going sometimes because the thickness of the metal is so thin. Send me your info through PM and I will send as many feet and screws that you need to get these correct for you

PT- These controllers have 20 colors on them and the ability to make 6 of your own colors and save them. I will try a blue- ish white and post a pic in a few.

Joe

This looks like the blueish - white you may be looking for, but remember leds photo funny.

// Error: Image 31805 not found // // Error: Image 31806 not found // // Error: Image 31807 not found //

There is a change in the design I need to mention. The guitar will be facing the other direction and rotated so the whammy bar is on the bottom, the neck to the right and logo upper left.

thanks
Joe

I've gotten alot of emails but not one from you I don't think.

3 left

Thank you very much. There are only 2 left now.

1 left

Arcade- message sent.

They are all gone. Thank you to all that ordered one. I will be shipping these out next week.

Due to the response I received I will get more of this sized acrylic in a week or so. If you want one let me know, I have minimum quantity I have to order to keep my pricing where it is.

Joe

They are plug and play into your pinball machine. I do make them with a wall wart if desired.

Joe

No.. these have velcro strips that go over the feet and stick to the machine.

Here is the new pic

NEW_ACDC.jpg

All toppers for the first run have shipped out. I am going to start running X-Men tomorrow. The acrylic for the second run should be ready for pick up next Tuesday and I'll start running them. If you want a X-Men, nows the time, second run won't be for a couple of weeks.

Thank you to all who ordered, I do truly appreciate it.

Joe

Stupid question but did you insert the screws on the countersunk side. I had a customer install it the other way and they don't reach the channel. What you should do if they are correct is countersink the leg a little more. The channel is very thin due to the size, and there is only 2 threads to grab it. I am sorry this happened to you and if you need me to send out more of anything you just let me know.

Joe

The second run will be shipping out Thursday, so if you are on the list you will be getting a email from me very soon. I have also went an extra step in re- tapping all feet holes. It looks like to much powder coating is getting into the holes even though we have a procedure to prevent this, it isn't perfect apparently. If anybody still would like one I have 10 extra not accounted for, I will not be running this again once this shipment runs out.

Also we will be starting to give choices on the size of the topper you want. The standard 6.5" or 9" like the guitar. This will allow for better art to be produced with the extra space available to Jay.

6.5" toppers will be $ 140.00
9" toppers will be $ 150.00

Joe

These guitars are just under 9" tall, they connect to the 12v spare by the service outlet RHS.

We are only producing the guitar in 9" and I will honor the FDS I ran till these are gone. Use our website to contact us for an order www.laseriffic.com