About a year ago I posted about issues with my Cross Town. It took longer than I expected, but finally have it setup in the house. When I plug it in, the subway doors open and remain open. The reset bank does nothing, the score motor keeps rotating and the is what I will call the rest buzz.

Help with this is appreciated!
Don

I manually advanced the 100 score reel and plugged it back in. Now the 100 wheel and the score motor both run continuously. Its been a long time since I played it, but from what I recall, its like pressing and holding the coin door replay button.

Found one problem. A wire on the hundreds wheel needed to be re-soldered. Now it will reset to 000, however as before as soon as there is power it doesn't finish a reset and keeps running.

I have no experience with working on this. I had thought that if the reels went back to zero that meant the switches operated properly. If that isn't correct please let me know. Thank you

I feel lots better as it seems to be a simple fix. Thank you for the pointers

Starting with 10's reel which had no circuit board. I cleaned the contacts and moved them to touching at zero. Plugged it in and that reel now spins. Did a search and it says with the wheel at zero, the contact should be open not closed. So to me that means that it was set properly with the contacts closed at zero which must be the case for all the reels or they would be spinning.

Stuck

Studying the zero contact - it is 2 sets of 2. When one pair open, the other pair close

Problem solved

Dirty contacts on the zero switch.