I'd be interested, with a final decision based on price. Also, it would have to play nice with the PinballMikeD video mod, ColorDMD and the lighted speaker panel mod.
You're currently viewing posts by Pinsider Jackalwere.
Click here to go back to viewing the entire thread.
I'd be interested, with a final decision based on price. Also, it would have to play nice with the PinballMikeD video mod, ColorDMD and the lighted speaker panel mod.
Quoted from swinks:Question: as I want to work in with other mods and curious where the LCD mod pulls it's 12VDC from as I don't want to take power from the same place and cause you guys potential problems. Please let me know along with a few photos so I can finalise a plug and play system that will work on it's own and along side other peoples CFTBL powered mods.
Cheers
Jady
Like burningman says, the video mod draws from the power board to the left of the coin door. I snapped this photo before I ran off to work, so its not very good...its in the bottom right corner of the photo.
image-733.jpgQuoted from swinks:thanks everyone for the support
I am going to tweak the building decal a little and do the FILM decal in the next few days to show people for feedback and then will send out files for quotes for laser cutting and printing by the end of the week to then work out a price based on a run of 10 and run of 20 and report back.
thanks again
Jady
Please do more than 20, I think I'm 24th on the "I'm interested" list
You're currently viewing posts by Pinsider Jackalwere.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/creature-cftbl-retro-building-neon-mod?tu=Jackalwere and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.