My Reproduction CPR Whirlwind Playfield is missing the slot for the shooter lane switch. Has anyone else this issue. Unfortunately, I did not notice it until the Playfield was mostly populated top and bottom. I am a little nervous to try a router - ideas?

829DA4AF-9F70-4E29-A549-BC881E3BC5D6 (resized).jpeg

9C66DA79-8BDC-4DB6-A8C8-853C5F0542BB (resized).jpeg

I have not rebuilt the discs yet so they will get new decals soon. The discs are in for fit purposes only. Most of the dimples are not correct so it is easier to fit everything with the harness off the Playfield.

I will contact sonic, this might be the cleanest solution. When you sell a game everyone always wants pictures of the shooter lane so I don’t want to dick up the lane with a router it I don’t have to.

I went ahead and cut the slot with a router. Thank you for all the ideas.

819DC17F-35D6-4F52-A4EC-EB499D44F67A (resized).jpeg

97476C93-7E4B-4226-9739-79F66699B4B5 (resized).jpeg

Everything is back on. The missing switch slot probably cost me a day of work/rework. I coated the route red slot with a water base product from Sherwin Williams call Diamond Plate.

0BA0E259-66AB-4D67-80E3-D99116607E43 (resized).jpeg

3435B5BE-F6F3-4321-B1B3-1CB8438E6FBE (resized).jpeg

676808DC-7629-4287-AD52-1E9542EF38E3 (resized).jpeg

9D4247F2-1402-43A6-B15C-0D23A30F988D (resized).jpeg