Addams Family, The
Bally, 1992
Indiana Jones: The Pinball Adventure
Williams, 1993
Twilight Zone
Bally, 1993Does anyone where to get backglasses trim and lift channel pieces that will fit CPRs new mirrored back glasses (Addams Family, Twilight Zone or Indiana Jones)?
The standard trim for the translight versions do not fit.
I have tried a bunch from Marco and Pinball Life and they are all too tight.
Thanks
Quoted from jjoravec:Mine wont fit at all and dont want to force it. Same with IJ.
My TZ fit as
Well, and was also tight. I could not really get the side trim on though. The lift channel will fit, you just have to use gentle pressure. I put the lift channel on one side and gently tap it on until I get to the other side
Quoted from Kingpin22:I was able to get the lift bar on my T2 and Funhouse but not the sides. Anybody else find something to work on e sides?
The plastic intended for WPC95 games is about the right thickness - but I have yet to find a supplier. The best anyone has found is to take the regular WPC89 / DCS trim and use a heat gun to slightly soften them, enough that you can force them onto the glass. I did it a few months ago on TZ. Works perfectly, fits great. You just have to go slow and not use too much heat or too much pressure
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cpr-mirrored-backglasses-what-trim-to-use?hl=durzel and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Haymarket, VA
Bath