I just received a CPR backglass for a TZ and GnR. My current translight trim doesn’t fit. Does anyone sell a lift channel and trim that will fit correctly without using friction tape?
If you have factory trim originally it should fit but it won't be an easy fit. I have several of their glasses and found the same for most. You won't be using any tape and it will take a little wiggling into the backbox.
For my GNR I got 27" lift channel & top trim as well as longer trim for sides. Just cut to fit. I think the GNR was 26-1/8" & the sides were like 19". My translite trim was to short on the sides. So if you get all 27" pieces you can frame it up nicely after cutting. Pinballlife.com has them in stock. Also did H-Channel. Everything fit perfectly & went on easily on the CPR glass.
Stern ones are fine, I had some Bally / Williams left over from my Earthshaker & they also fit fine. I don't see a difference in either one. The glass thickness on the CPR is basically the same as stock, I've never had a issue fitting them on. For some reason the GNR trim was to short on the sides with the translite. That's why I did longer ones for the look. Fits in machine no problem. Just make sure you get right length. The data east/stern ones for the sides are to short, get extra top pieces for the sides.
Quoted from Gunner:I just received a CPR backglass for a TZ and GnR. My current translight trim doesn’t fit. Does anyone sell a lift channel and trim that will fit correctly without using friction tape?
How’s the quality of these? Color saturation? Lighting coming through good? I’ve been tempted to get one of the pinbot ones, and a TZ I have needs the translite replaces.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cpr-mirrored-back-glass?hl=jrotten and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.