Cow Poke relay R wont energize by itself but will hold & then let go when game is shut off. Theres a dark blue wire on 1 side of relay and 1 red/white tracer on the other, solid black on 1 contact & solid red on other looking to find out where or what other connections trigger this. Any help would be greatly appreciated.

I see that know, I`ll look for those , should I of posted a pic of the schematic?

Ill look into S relay later ,coin chute sw is always open cause the doorbell button overrides it. The only bounce/ anti cheat thats open is under the playfield lower right bottom(colors don`t match those switches, the shut off switch is between the plug & 7.5 amp fuse.

Just looked at the schematic what happened to the S relay? There isn`t any on mine.

Added over 8 years ago: After a few days of looking into this machine I found the S relay it`s in the 13 bank set. The wires were covering the label.

It`s late I think, just because I turned it on I thought the lights would come on , not happening, hit the door bell button and it fired up. Thanks for making me look closer at this. Now to the next problem... I see that S is just a switch.

After cleaning up the 1s score reel, the motor runs & the 1s score reel doesnt stop. The 1s score reel is missing the tag that says which cam does what. Could it be the rebuild was wrong?