Cow Poke
Gottlieb, 1965You're currently viewing posts by Pinsider drussksu.
Click here to go back to viewing the entire thread.
Hey Everyone,
I am having issues with my cowpoke. When ball passes the left rollover switch to drain. Machine does not register. There is no power when checked with volt meter going to that switch. In addition when the ball hits left of the center target on the roto target nothing registers. Right rollover works fine as does hitting the right side of the rollover target. Anyone have ideas on how this could be fixed?
Thanks Pinsiders,
Dan
Quoted from jrpinball:I'd check the roto unit. Make sure all the wipers are contacting their respective rivets in the stopped position. The roto unit disc may need to be slightly realigned by loosening the three screws which hold it to the cast metal hub. Check for broken off wires on the roto unit as well.
That’s it. Adjusted the alignment on the roto in stopped position and it’s working great !!
Thanks
You're currently viewing posts by Pinsider drussksu.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cowpoke-left-rollover-switch?tu=drussksu and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Shaker Heights, OH