(Topic ID: 264291)

COVID-19 House Arrest - What Game Are You Working On?

By clodpole

4 years ago


Topic Heartbeat

Topic Stats

  • 667 posts
  • 171 Pinsiders participating
  • Latest reply 3 years ago by Ceckitti
  • Topic is favorited by 18 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    DSC_0335 (resized).JPG
    DSC_0334 (resized).JPG
    DSC_0333 (resized).JPG
    DSC_0331 (resized).JPG
    DSC_0330 (resized).JPG
    DSC_0306 (resized).JPG
    DSC_0293 (resized).JPG
    DSC_0282 (resized).JPG
    DSC_0303 (resized).JPG
    FA9F6C06-A0B1-4BB5-948A-62C432AB2271 (resized).jpeg
    70819F65-F8C7-4F98-B7B9-441BA11D8D47 (resized).jpeg
    EDCC5E2B-FEAB-4C3C-BAA9-E1235B5357D8 (resized).jpeg
    ED9393B1-B0C4-4D6F-940D-73A5F1332F40 (resized).jpeg
    04F31A08-5678-4E41-B1AF-F6CF74B405DD (resized).jpeg
    20200723_211140 (resized).jpg
    20200725_114318 (resized).jpg

    You're currently viewing posts by Pinsider silverstreak02.
    Click here to go back to viewing the entire thread.

    1 week later
    #293 3 years ago

    Replaced some light sockets in the back box today.

    D8467BAB-8969-4426-9A52-61924C96ACE2 (resized).jpegD8467BAB-8969-4426-9A52-61924C96ACE2 (resized).jpeg
    1 week later
    #383 3 years ago
    Quoted from chad:

    Wrapping up Grand Prix.
    [quoted image]

    What do you plan to do about the cupped inserts?

    #385 3 years ago
    Quoted from chad:

    They are bad indeed. For this game, I will be leaving it as they are. Just have the pitch a bit higher to ensure no slow ball catch on one.

    I hope that works for you. I tried it on two games without success.

    2 weeks later
    11
    #461 3 years ago

    Repairing and painting my Space Mission cabinet.

    C2CA1B83-0011-453C-B21A-999F0D03A9E2 (resized).jpegC2CA1B83-0011-453C-B21A-999F0D03A9E2 (resized).jpegCC422E90-981F-457A-B739-BEE6FA0F8382 (resized).jpegCC422E90-981F-457A-B739-BEE6FA0F8382 (resized).jpeg

    1 week later
    #509 3 years ago

    I replaced the bottom panel of the cabinet. Next is fixing the lower edge of the particle board back panel.

    4334EDC2-0C45-4463-A3D4-515A22D0D372 (resized).jpeg4334EDC2-0C45-4463-A3D4-515A22D0D372 (resized).jpeg
    #512 3 years ago
    Quoted from clodpole:

    What're you gonna' use for the particle board repair?

    Fiberglass resin.

    #518 3 years ago
    Quoted from Silverstreak02:

    I replaced the bottom panel of the cabinet. Next is fixing the lower edge of the particle board back panel.
    [quoted image]

    I completed the fiberglass repair and put the first coat of polyurethane on the bottom panel.

    0E13F541-972E-4DB4-857A-9DE8D439CA67 (resized).jpeg0E13F541-972E-4DB4-857A-9DE8D439CA67 (resized).jpeg52979107-B5F7-42D7-A74A-F0579BF573FA (resized).jpeg52979107-B5F7-42D7-A74A-F0579BF573FA (resized).jpegF4961236-365A-45F0-8F0B-34474C44D138 (resized).jpegF4961236-365A-45F0-8F0B-34474C44D138 (resized).jpeg
    1 week later
    #569 3 years ago

    I ordered a shooter housing from PBR for my Space Mission. I’m doing a cabinet repaint and felt the old one was good but not good enough for the repaint. I received it today and am very happy with it. Huge difference in my opinion. No more chips or discoloration. The new one is shiny and perfect although it doesn’t have the “W” logo. PBR makes great parts.

    2ED19A1C-C8DE-4E46-BE5D-926DEDE6E6A6 (resized).jpeg2ED19A1C-C8DE-4E46-BE5D-926DEDE6E6A6 (resized).jpegC9C53AA2-271B-41F5-BB62-225F2AD6060F (resized).jpegC9C53AA2-271B-41F5-BB62-225F2AD6060F (resized).jpeg
    #571 3 years ago

    Polishing the side rails. One down one to go.

    F574EDDE-CBB0-480E-9653-628E2EFF046E (resized).jpegF574EDDE-CBB0-480E-9653-628E2EFF046E (resized).jpeg
    #577 3 years ago
    Quoted from Colsond3:

    Curious, what are you using for polish? I’ve been using Quick Glo and Flitz, but looking to try something different.

    I started with 60 grit on my Orbital sander to remove the dings and scratches. I went up to 220 on the sander and then swapped to a sanding block. I took that in steps up to 2000 grit before finishing with Mother’s Mag and aluminum polish. Way too much work (about 3 hours on each rail). There has to be a better way.

    #596 3 years ago

    I started to work on my Space Mission coin door. The inside brackets were too far gone to polish and plating is too pricey. My solution was to clean in my ultrasonic and paint. I still need to polish the door, but here is a picture of the inside stuff.

    340F8CF1-877C-4C69-B12D-AB7719E74B5C (resized).jpeg340F8CF1-877C-4C69-B12D-AB7719E74B5C (resized).jpeg
    1 week later
    #614 3 years ago

    I finished polishing the coin door today. I did it three times and still have some areas of light scratches and cloudiness. I’m not sure how some guys make these look like a mirror. I gave up and am calling it good enough.

    3FAA6919-B40F-4C99-8FBB-6929DB28E58F (resized).jpeg3FAA6919-B40F-4C99-8FBB-6929DB28E58F (resized).jpegBDD0D57E-60AE-40F4-B612-2577694D712D (resized).jpegBDD0D57E-60AE-40F4-B612-2577694D712D (resized).jpeg
    #616 3 years ago

    I finished the coin door today. It was completely disassembled, cleaned, painted or polished. I think it is much better and will go well with the freshly painted cabinet.

    0C9ED4AF-CB7D-42BD-A7BB-4F5A26DDF333 (resized).jpeg0C9ED4AF-CB7D-42BD-A7BB-4F5A26DDF333 (resized).jpeg40D96258-9076-4641-8A2A-D214B41BFE8C (resized).jpeg40D96258-9076-4641-8A2A-D214B41BFE8C (resized).jpegBC114983-0110-4212-85B1-4108F041A9CE (resized).jpegBC114983-0110-4212-85B1-4108F041A9CE (resized).jpegF2871749-C7E1-41F4-92CC-C640C558F90E (resized).jpegF2871749-C7E1-41F4-92CC-C640C558F90E (resized).jpeg

    76485623-9795-4D07-884B-FC34AE858B21 (resized).jpeg76485623-9795-4D07-884B-FC34AE858B21 (resized).jpeg
    1 week later
    11
    #625 3 years ago

    I put the red on my Space Mission. Blue is next week.

    45199C1D-F2FB-4FDB-A432-2CA7DBE3A2ED (resized).jpeg45199C1D-F2FB-4FDB-A432-2CA7DBE3A2ED (resized).jpeg

    #626 3 years ago

    I painted the blue on the back box and polished a few metal trim pieces.

    16290E7A-50CA-44AB-B15E-24F0FB30C3EB (resized).jpeg16290E7A-50CA-44AB-B15E-24F0FB30C3EB (resized).jpegD9759610-4135-45E7-82A0-121826E67CAF (resized).jpegD9759610-4135-45E7-82A0-121826E67CAF (resized).jpeg1E3DD4D1-D571-4329-AD6D-E753518F39B7 (resized).jpeg1E3DD4D1-D571-4329-AD6D-E753518F39B7 (resized).jpeg

    #628 3 years ago

    Painted blue on the sides of the cabinet. I need to get more blue and paint the front. Then I’ll fix a few spots where the red peeled some.

    B6631D04-A7FD-43A3-99BE-92D5AB5A0980 (resized).jpegB6631D04-A7FD-43A3-99BE-92D5AB5A0980 (resized).jpegF33871F8-1B8C-4F12-BE19-E70CAF181FE1 (resized).jpegF33871F8-1B8C-4F12-BE19-E70CAF181FE1 (resized).jpeg

    #641 3 years ago

    I’m not sure why, but I took apart my Space Mission chime box. I polished what I could and painted the rest.

    600485AB-8ED9-44FE-B31A-850EB5CAE67C (resized).jpeg600485AB-8ED9-44FE-B31A-850EB5CAE67C (resized).jpeg0DE077AB-EB9E-4F73-A4AB-7A2E101A106A (resized).jpeg0DE077AB-EB9E-4F73-A4AB-7A2E101A106A (resized).jpeg593FB0C0-5E15-4001-B129-A473D6FA926B (resized).jpeg593FB0C0-5E15-4001-B129-A473D6FA926B (resized).jpegCFA9EC7B-09C3-4EC5-B18E-0F27BBE11CD4 (resized).jpegCFA9EC7B-09C3-4EC5-B18E-0F27BBE11CD4 (resized).jpeg
    #643 3 years ago
    Quoted from clodpole:

    Do you think it sounds different, now that it's all shined up?

    Unfortunately no. It will still be a clunk box.

    #651 3 years ago

    Making progress on the cabinet.

    4EC837D0-A6BD-430F-8C4D-BE118F0E1100 (resized).jpeg4EC837D0-A6BD-430F-8C4D-BE118F0E1100 (resized).jpeg7F3A1DB2-455A-4831-9C79-E3661F711349 (resized).jpeg7F3A1DB2-455A-4831-9C79-E3661F711349 (resized).jpeg755BC08D-6340-4D33-8F44-A3CB3344A1EF (resized).jpeg755BC08D-6340-4D33-8F44-A3CB3344A1EF (resized).jpegE1F81EBD-9CFA-4B56-855C-5217126E0484 (resized).jpegE1F81EBD-9CFA-4B56-855C-5217126E0484 (resized).jpeg

    You're currently viewing posts by Pinsider silverstreak02.
    Click here to go back to viewing the entire thread.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/covid-19-house-arrest-what-game-are-you-working-on?tu=silverstreak02 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.