Big Shot left bank had some brackets bent. Got that fixed last night and replaced all the drop targets. Going to try for a few more hours of sleep then finish mounting back onto the play field. Later today hopefully complete the right bank and possibly reassemble the rest of the machine. The pop bumper is really gummed up but shouldn't be as bad as these drop banks. Not sure if the parts polisher is finished doing it's job yet. I need to keep working on pins now because the weather is about to get warm outside for the first time in awhile and will want to accomplish some outside non pinball stuff soon.

IMG_4772[1] (resized).JPG

Big Shot is done moving onto Space Mission. Spent last night cleaning posts. Does this game hold the record for most posts?

IMG_5043[1] (resized).JPG

Got Stellar Wars to the point where I can safely power it up. Not playable yet but looking good. This was a PF swap. The original PF was actually in average shape. I was able to secure another PF that saw very little use. Unfortunately it was missing the huge center insert and even had some water damage on the artwork around the left outlane. I pulled the middle insert off my original playfield and sent the second PF over to CaptainNeo and with a little work on both our parts it turned into the below.

Might take more pictures in it's own thread once everything is done.

HLTB9776[1] (resized).JPG

Not game specific but my scanner and I are EXHAUSTED.

Went through some flyers and found out Pinside is (was) missing a lot of EM pinball flyers in the database.

Here are some I got uploaded to Pinside today.

IMG_5344 (resized).JPG

Space Mission playfield is officially shopped and ready to be played. Still want to clean the score reels and clean out the inside of the pedestal. Was hoping to have somewhat of an open house for pinball by now this year but you-know-what changed my plans

IMG_E5352 (resized).JPG

Playfield is in up position and snuck in this picture. Shop out in progress...

IMG_5781 (resized).JPG