Hello All! Does anyone know where I can get a 9 lamp p/c board for CORVETTE? This is part # A-19037-1. This is the board under the nine corvette's that lights it. Takes 9 555 bulbs. Thanks for the help!
You're currently viewing posts by Pinsider jbp8653.
Click here to go back to viewing the entire thread.
Hello All! Does anyone know where I can get a 9 lamp p/c board for CORVETTE? This is part # A-19037-1. This is the board under the nine corvette's that lights it. Takes 9 555 bulbs. Thanks for the help!
Quoted from johnwartjr:1 socket is missing from the board ngoett linked - but the socket should be readily available and easily replaced.
What's wrong with your board? Should be easy to fix it, if you've got one... if it's missing entirely, that makes things a bit more challenging most definitely
There are 9 bulbs. 5 are in twist in sockets. 4 are placed on each side of board in a press in socket. Two of those sockets are bad. Looks like someone at one time rigged a small wire from board to one side of socket to repair. If I could find 2 replacement sockets might be able to remove old ones and solder in new ones. I seen some on Marcos that might work. Was hoping to find a complete board just in case. Pin is really nice so want to fix it right!
Quoted from johnwartjr:You're looking for P/N 24-8805
1224 .2 A-19037-1 9 lamp pcb & spacers 1
1225 ..3 A-19037 9 lamp pcb assy 1
1226 ...4 A-19037-AI 9 lamp pcb assy 1
1227 ....5 5768-14300-00 pcb-9 lamp 1
1228 ....5 5070-09054-00 diode-1N4004 1.0a 9
1229 ...4 24-8767 socket-pcb twist 5
1230 ...4 24-8805 socket-pcb H wedge 4
Available here:
http://www.pinballlife.com/index.php?p=product&id=1226
Or here:
http://www.marcospecialties.com/pinball-parts/24-8805
Thanks! Thats the one I thought would work. I ordered 5 of them. Don't get what the third terminal is for unless just to locate to board ( unless I am not looking at it right )
Quoted from SealClubber:I may have an extra one at home. I won't be home until next Sunday to check so maybe you will find one quicker.
Thank you!!!!
Quoted from SealClubber:Yeah, some bulbs are a tight squeeze. I always remove the entire board from the game when replace a bulb in the side sockets so I can get a good firm grip so the socket doesn't rip out when inserting the bulb.
Yup, Already learned that the hard way when I first got the game. I am sure thats how the 2 sockets got damaged to start with. Had to repair the repair!!!!! Taking the board all the way out to change bulbs definetly the way to do it
You're currently viewing posts by Pinsider jbp8653.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/corvette-pc-board-part?tu=jbp8653 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.