You're currently viewing posts by Pinsider PohodaVole.
Click here to go back to viewing the entire thread.
Hello,
I am looking for the solution how to fix the problem with not moving cars in Corvette. I have found that the problem should be in fuse F11, ribbon cable, optos or the wire which connects them. Are there please any other things to check?
Thank you very much!
Hello,
My friend has checked the fuses, ribbon and optos but the cars always go only up and they don´t stop or move back. It is always same in the game or in the test. Don´t please somebody know what should be the problem?
Thank you.
Petr
Quoted from zaza:In the 'Race-Test' T17, it shows a counter from 0 to about 900+ during 1st selftest, does that work ?
If this test doesn't work correct, it aborts the test and racetrack-cars won't work.
The opto-couplers at the end of the track are dirty or burnt if this test fails.
Quoted from Butch2099:Take the track off (not that hard). See if the cables that move the cars is working freely. There are 2 plastic gears that can get broken in the pulley system it has going on. Sometimes the eye loop on the cable gets jammed in the gears also. It sounds like the game will engage them by going to the top, but possible something is jamming on the reverse.
Hello,
The problem was in the start. Both cars were at the finish but there was something what was activating bottom optos so it thought that it is still on start. My friend put out the track so we saw that the problem is in the bottom part because it is not firm to keep it together.
Btw don´t you please know if is it possible to buy whole new track?
Thank you for the help!
You're currently viewing posts by Pinsider PohodaVole.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/corvette-not-moving-cars-problem?tu=PohodaVole and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Praha
West Chicago, IL
Etten-leur, NB