There is no specific terminal connections, all that matters is that he wire providing power to the coil is connected to the same terminal leg as the striped side of the diode.
(Topic ID: 272388)
You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Quoted from Bigguy66:I have two wires: one has red/black stripes and the other has orange/black stripes.
Quoted from Bigguy66:So how do I tell which wire is providing power to the coil?
Quoted from Bigguy66:Am I correct?
I would say yes; If in doubt, you can always measure the continuity of the disconnected wire back to its fuse, in this case F24.
According to your manual (page 56) the wire powering the coil should be BLK/RED - Red stripped wire as the diagram show it to be color code 022 as this wire is connected to the same coil leg as the stripped side of the diode. The other side of the coil is connected wire color code 233 which correlates to a Red/ORG - Orange stripped wire. The color table for this is on page 24.
pasted_image (resized).png
pasted_image (resized).png
Promoted items from Pinside Marketplace and Pinside Shops!
Rhinelander, WI
You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
