Hoping someone will be able to help me. I have a bank of 3 lights out on my Getaway HS2. When I moved the wires while the machine was on it worked again but they were still dim. Since I'm not sure if it is the IDC connector or the header my plan was to replace both. These were the parts from Pinball Life that I was planning to order: .156" (3.96mm) *Crimp & Stuff* 5-Position Housing With Locking Ramp and .156" (3.96mm) Locking Header - 5-PIN and .156" Trifurcon Crimp Terminals. Is this correct? Should be an easy fix but it will be my first official soldering attempt.

IMG_2251 (resized).JPG

The current connector has a key/small plastic pin. I will try to resolder and see how it goes. Thank you!