So, since spare power module assemblies for system3 are unobtanium in europe, i bought a 110v power module.
I wanted to ask if this is easy to convert to 220v?
Is it just to plug in the 22v jumper cable, and add correct line and and power fuses? Or is it specific components inside the module which are 110 specific?
Below is photo of 11v module and 220v module.
20181012_174111 (resized).jpg4bfbaec3801bdc23949703198bd2b16c7cd658ff (resized).jpgThat should be all you need. The module is configurable for a wide range of voltages, and the components on the mains side of the transformer are designed for that. Change to the desired jumper...555 wire color code (green) Change to the recommended fuses, and change to correct mains cord.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/converting-glb-sys3-110v-to-220v and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Berea, OH
