Quoted from o-din:Funny, as I look at my 90s B/W games, they all have artwork under the posts and not a one exhibits any signs of pooling or paint loss there.
It won't do as it is screen printed. That's 5 layers of paint and then possibly 2 layers of solvent epoxy clear.
whereas these are digitally printed which is a microscopically thin layer of ink/paint and then 2+ layers of water based clear.
You want a bulletproof playfield?
Use marine ply (no voids, hardwood)
Run it through a roller to compress the fibres
Screen print it in a 5 layer process using lead based ink
Clear it with 2 layers of solvent clear
and allow proper curing time between all of them.
Of course this is now impossible but if Zaccaria could do it, then it must still be technically possible.