Quoted from Yelobird:Completely agree. Yes the play in the post will irritate the surface but that is not the actual cause of the failure. These types of T-nuts have been used for many years. The surface they are mounted to is a different story. Making the holes smaller will help but definitely not fix or solve the issue.
I agree - it’s not one issue, it’s several. First - the digital print isn’t adhering as well as the old school screen print. Second - whatever clear they are using is WAY softer than Diamondplate was. Third - get rid of the art around the posts. And last - tight holes are always better than loose ones!
Stern still does the tight hole thing like BLY/WMS did - here’s a pic of my DP with a nut/washer removed:
0F4A65F8-C032-4CAF-9183-16A5CBFEF626 (resized).jpeg