My CONGO bottom play field GI is out. I checked fuses they are good. The J105 female connector has a burnt spot on it. I'm assuming this is the problem. The pins on the board don't look bad. I'm having trouble finding the part # for the 11 pin female connector. Can somebody point me in the right direction please?
http://www.greatplainselectronics.com/
Ed has the parts. Size .156 ( tools too )
You need new connector and pins too. If you don't replace the pins, the connector will burn again real soon. Even if they look good they aren't.
When you replace the pins, check continuity of each pin onto the board away from the repair area to be sure you didn't lose through board continuity.
LTG : )
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/congo-gi-help-1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Myrtle Beach, SC