Quoted from Gov:Just realized I have to replace the bulbs in the pops as they are warm whites, not sunlight.....BAH! Taking that ramp off is a pain.
I must have missed it, what bulbs are you using? They look great under the green plastics.
You're currently viewing posts by Pinsider lpeters82.
Click here to go back to viewing the entire thread.
Quoted from Gov:Just realized I have to replace the bulbs in the pops as they are warm whites, not sunlight.....BAH! Taking that ramp off is a pain.
I must have missed it, what bulbs are you using? They look great under the green plastics.
Did you use the same bulb for the spotlight? I think I'm going to place an order.
PS: I suggest adding a spotlight (or two) on the volcano.
I used lighting strips on the apron, which work nicely on this game IMO. I'm going to have to do some testing to see how the shades work together; or perhaps comet will soon release a sunlight strips. My next Congo project will be adding red flashers behind the backbox (and perhaps under cabinet) to really create a lightshow at the start of multiball. I did this on my BSD for the lightning, and I really like the effect. Did you struggle at all choosing the bulbs for the lower playfield? I've tried green, yellow, purple, orange, warm white, and cool white. I have orange in there currently, but I haven't been completely happy with anything.
You're currently viewing posts by Pinsider lpeters82.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/congo-full-restorationcustomization-above-and-beyond?tu=lpeters82 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.