Noticed the flashers on my Congo are out.
Checked fuse #107 and it is NOT blown
Re-seated J134 and J112. No change.
What is the next area to check / test ? Help. Thanks!
You're currently viewing posts by Pinsider mulder2010.
Click here to go back to viewing the entire thread.
Noticed the flashers on my Congo are out.
Checked fuse #107 and it is NOT blown
Re-seated J134 and J112. No change.
What is the next area to check / test ? Help. Thanks!
Fuse was pulled and checked with a meter. All good.
I didn't pull any of the bulbs, but all were working very recently.
Where exactly is the flasher voltage test point? What am I checking for there? Thanks for the reply!
The coin door was open when I did the test, so that's why it didn't register. Registers now. Same as when I was testing the flashers - coin door open.
When I fixed the gorilla GI, I tested the flashers, got nothing and thought that somehow affected the flashers fixing the GI. All is well.
Thank you for your help LTG!
You're currently viewing posts by Pinsider mulder2010.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/congo-flashers-not-working?tu=mulder2010 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.