You're currently viewing posts by Pinsider brazy.
Click here to go back to viewing the entire thread.
Please forgive me if i haven't researched enough or this is a stupid question but. ..the new t3 display is plug and play? I have only replaced newer dmds with the same type and thought the older ones ran on high voltage and there had to be modification to the power supply or something.
Quoted from PinballManiac40:Here is a video of installing it in a Monopoly (Whitestar) game, which is what T3 is. Granted, this is the LCD display, but the LED will be very similar.
» YouTube video
Thank you
Quoted from Dmod:The LED display is low voltage and runs off 12V from the power connector near the coin door. The Whitestar DMD controller board needs to be removed from the back of your existing display and will pop on to standoffs on the rear of the ColorDMD LED. You'll also need to unscrew the mounting supports from the original display and use them to mount the ColorDMD LED.
Installation will normally take around 15-20 minutes.
Cool, thank you
You're currently viewing posts by Pinsider brazy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/colordmd-introduces-new-rgb-led-display?tu=brazy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
![IMGA0695[1] (resized).JPG](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)