Update: ColorDMD (LCD) is now installed in my DE. Was rather simple, just trimming off the lip on the back and installed without any issues. I also did not have to pre-drill any holes in the colorDMD
However ran into one problem: The back box light panel is in the way and wont allow enough clearance for the DMD. So, sadly I have to relocate a light and cut the light panel so the DMD can fit.
Also in my case, the DMD panel was damaged in its past so I really had no issue with trimming it a bit. The mounting screws were drilled out and replaced with bolts mounted from the front, this was done by the previous owner.
Overall, I still think it was pretty simple to install. Now I wait for the code...
20160823_182352 (resized).jpg