Quoted from Dmod:Paul Rodgers + Jimmy Page -> ???
The Firm! Satisfaction Guaranteed.
(Topic ID: 150879)
Linked Games
24
Stern, 2009-
Adventures of Rocky and Bullwinkle and Friends, The
Data East, 1993
-
Airborne
Capcom, 1996
-
Apollo 13
Sega, 1995
-
Batman
Data East, 1991
-
Big Bang Bar
Capcom, 1996
-
Black Rose
Bally, 1992
-
Bram Stoker's Dracula
Williams, 1993
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Saint Paul, MN
Quoted from Mudflaps:Indy 500 folks
Yup that's it. 
EDIT: I have plenty of volunteers now! No more needed.
Anyone in the US buying a ColorDMD for one of the newer Sterns with the angled panel that requires the standoffs - if you want to test out some die cut foam spacers I'm working on that enclose the display borders, covering the gap from the spacers, PM me. I'll send a few of you a set for free if you document your install with pics and let me know how it works for you. I've always hated the electrical tape solution, and this is a very quick and clean install.
Quoted from PinMonk:Anyone in the US buying a ColorDMD for one of the newer Sterns with the angled panel that requires the standoffs - if you want to test out some die cut foam spacers I'm working on that enclose the display borders, covering the gap from the spacers, PM me. I'll send a few of you a set for free if you document your install with pics and let me know how it works for you. I've always hated the electrical tape solution, and this is a very quick and clean install.
Very nice of you to offer this.
Quoted from Ericpinballfan:Very nice of you to offer this.
Pretty sure it's ready to be sold as an accessory. I love the fit and it's a huge improvement over draping layers of electrical tape around the edges to seal the light. But, I'd like to have a few pinsiders test it out on their machines to make sure I didn't miss something in the design/install.
Quoted from PinMonk:Anyone in the US buying a ColorDMD for one of the newer Sterns with the angled panel that requires the standoffs - if you want to test out some die cut foam spacers I'm working on that enclose the display borders, covering the gap from the spacers, PM me. I'll send a few of you a set for free if you document your install with pics and let me know how it works for you. I've always hated the electrical tape solution, and this is a very quick and clean install.
Pm sent
Quoted from PeterG:ColorDMD 72????
Not sure what it is, but the Whirlpool brand brings Black Rose to mind (and coincidentally the machine dial is reminiscent of the cannon mech 
)
Sydney
Quoted from PoMC:Mustang - right ramp return spins the ball around.
Spin (cycle) you say...Wheel of Fortune?
Quoted from yzfguy:I can't think of a way to "spin" this into Ghostbusters.....
The machine is white, like the ghost logo. The storage facility is a machine that works by horizontally inserting a payload, similar to this side loaded washer/dryer. The end result is a trap that's "clean" just like the clothes.
****Ghostbusters confirmed****
Quoted from pocketscience:72... PINBALL GEOMETRY ESCAPE
Figure it out.
Have tried a handful of ideas on this with nothing standing out, but I question if there's significance to the skipped "11" in the polygon sequence.
EDIT: 64 sides in total--not sure if that could mean it's for a 192x64 game (wouldn't be too big a surprise with the reveal of the new DMD). Hoping for GB, but I can't see it in the clues yet.
Quoted from ASOA:Ladies and gentlemen. Ghostbusters!!!!!!
Negative Reinforcement on ESP Ability
Uh...sure. Then explain the first clue as it relates to GB.
Didn’t Slimer come out of a washing machine in one part of the movie. Haven’t seen it in years so not sure.
Quoted from PinballManiac40:Uh...sure. Then explain the first clue as it relates to GB.
Could be something to do with Spin cycle, Spin City, which was a show based in NYC.
Ghostbusters was in NYC.......maybe? 
Quoted from PinballManiac40:Uh...sure. Then explain the first clue as it relates to GB.
When the light is green the trap is clean.
Quoted from ASOA:When the light is green the trap is clean.
Yeah...keep on thinking that.
Quoted from PinballManiac40:Yeah...keep on thinking that.
Only time will tell my friend. 
As much as I want it to be GB I think it's Mustang. The washing machine looks vaguely like a mustang rim and there are 64 points in the shapes. 64 being the first year mustangs (not model year but calendar year) and the ramps on the machine being made for 1/64 scale models
Well if it's gb(please please please) I'm already locked and loaded. If it's wof I might be out another 400 bucks.
Quoted from Cheddar:As much as I want it to be GB I think it's Mustang. The washing machine looks vaguely like a mustang rim and there are 64 points in the shapes. 64 being the first year mustangs (not model year but calendar year) and the ramps on the machine being made for 1/64 scale models
Wow - nice thinking and I think you may be right.
I bet we will see Stern release a GB code update before a color ROM is available from ColorDMD. Have some patience. GB is only a 2 year old game.
Quoted from PinballManiac40:Uh...sure. Then explain the first clue as it relates to GB.
I already did.
Quoted from Beebl:I'm guessing Hurricane. Just need to figure out how 9 shape = 9 letters.
9 letters is making sense for 9 figures. Thank you.
1st hint - whirlpool as in the ramp in Black Rose.
2nd hint 9 figures=9 letters=Black Rose
Quoted from epthegeek:DENIED.
Ghostbusters then?
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
