Twilight Zone
Bally, 1993You're currently viewing posts by Pinsider goalie.
Click here to go back to viewing the entire thread.
Have you done a video test in the diagnostics? I had a very similar issue, after running a full test the machine kicked out a Ram failure on the Dmd controller board. You have to let the test run all the way through, it does the Ram test at the very end.
No it's in the video test on the machine, like where you test switches etc. Look in the manual in the test section it should tell you which one is the video. The video test runs dot line tests vertically and horizontally, just let it run all the way through those tests and see what it says when it gets through the RAM test.
You're currently viewing posts by Pinsider goalie.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/color-dmd-glitchy?tu=goalie and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Leander, TX