Quoted from dri:Here's the video! » YouTube video
Looks amazing!
Why is this not orange like my game ?
Looks amazing
You're currently viewing posts by Pinsider hank527.
Click here to go back to viewing the entire thread.
Quoted from dri:Here's the video! » YouTube video
Looks amazing!
Why is this not orange like my game ?
Looks amazing
Well install took 3 hours. The light board was a pain. I think I lost an hour dealing with wire that solder did not want to adhere to, but that was all I had and I was determined to get it done.
I think someone should make a led light board with surface mounts. Pinbits cough cough.
Quoted from TomGWI:I used Cointaker frosted 555 LED with 2 LEDs but you can use anything. I took the frosted bulb off , removed led from base and soldered per the guide.
That was the easy part. Hard part was wiring just because there are 13 pins to desolder, then wires to solder on to board and connector.
Turned out great though.
Use a dremmel to cut edges of plastic of CT bulbs. I recommend warm white in the supers as then you do not need to worry about polarity.
The bastard part is the 13 wire connector. I thought about reusing the pins a desoldered from the board, but they slide in and out so I went with a diff connector. My issue was getting the solder to adhere to the wire on the connector and I also cut one cable too short. The instruction said feed to the right, but I found the wire could be shorter 18 inches and could easily be fed to the left
You're currently viewing posts by Pinsider hank527.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/color-dmd-announces-dr-who-for-newest-release?tu=hank527 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.