Bally Rock Makers 1968
Got one problem fixed but found another. There was a wire removed from the 3rd Coin Chute Re. On the coin door. When I reattached it and started the pin here’s what happens:
Start relay energizes and holds
Score motor starts, but does not stop
Score reel all set to zero
Coin Latch relay energizes but does not latch.
I can manually hold the Coin Latch plate in, which latches the Coin Trip plate.
The minute I release the latch plate the score motor runs, but the Coin Relay will not latch.
Hope this made sense?
I can add the schematic for this section if it helps?
Thanks
Kickout

Should have added the Hold Relay is not energizing either.

Anyone out there?

Mark G,
Yes, on the coin relay. The AC hold switch at D6 when the coil Is at rest just keeps sparking.

32DB5113-1C51-4714-A12F-655C1DC43BE5 (resized).jpeg