Hello,

so me and my friend are trying to setup Comestero group RM5: G21 EU with an Iron Maiden Pro. I connected the coin mech with the provided cable which goes to CABINET NODE 1 CN8 (pictures attached). I also followed the instruction provided here http://www.sternpinball.com/upload/downloads/Custom_Pricing_SAM_System_Rev033006.pdf and changed my final settings to: 1/1.0 2/1.5 3/2.0 which should be 1 play for 1 EUR, 2 play for 1.5 EUR and 3 plays for 2.0 EUR.

My friend programmed RM5 that one coin is equal to 0.5 EUR, however once we connect everything we got 6 credits if we use 0.5 EUR or 1 coin. Anyway we are a bit lost and we are hoping to get some support from the community.

Is there any better documentation available or videos we can check ? Is there any switch/setting we missed in the menu ?

Also what mech you usually use if you are based in EU. I am tempted to get a new one which is self programming.
What are your recommendation and from where I can buy it ?

Some friends from Australia recommended me Microcoin QL Coin Mech, because it's self programmable, however not sure if has EUR preprogrammed and where I can buy it in EU ?

39917966_272750526883808_2221100675943628800_n (resized).jpg

39959111_1934216399974460_2869209119196184576_n (resized).jpg

So we solved the issue in that way that we disconnected coin 2 and coin 3 cable and connected pin 8 from the coin mech to coin 1 pin. It's a "hack", but it works with that coin mech.