Tales of the Arabian Nights
Williams, 1996You're currently viewing posts by Pinsider BestShot31.
Click here to go back to viewing the entire thread.
What would cause all four coin door service/function buttons to not work on my TOTAN?
I've also been dealing with other switch issues which looks like it's associated with a switch row at connector J205-8, which I cannot seem to be able to fix either. I would like solutions to this too.
All fuses seem to be fine. I pulled them with visual inspection and continuity testing.
Okay, I finally got some time to consider the advice and found that the coin door had two loose wires.
Once I soldered the two wire back on the connectors, three of the coin door buttons were working again, but the forward button was still out, corresponding to the D7 switch row. The entire row is still out, which was a problem that was recently fixed via a CPU board chip replacement, but has now come back.
Quoted from zaza:Is this the same board you are working on ?
https://pinside.com/pinball/forum/topic/need-help-with-totan-that-has-a-row-of-switches-out
Did you already replace ic's ?
Is coindoorinterfaceboard connected ?
Yes, this is the same board.
You're currently viewing posts by Pinsider BestShot31.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/coin-door-servicefunction-buttons-not-working?tu=BestShot31 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Upper Freehold, NJ