Shadow, The
Bally, 1994You're currently viewing posts by Pinsider castro28.
Click here to go back to viewing the entire thread.
Hey Jazzmaster, I had a similar problem with my No Fear which is close to TS (both made in 1995)
I ended up blowing a transistor (u20) on the CPU board. Luckily Williams had it socketed in so I just pulled it out and put in the new chip, fixed.
The pic below was what my dmd was saying:
Hope this helps!
image.jpg
Quoted from jazzmaster:I have tried to do this. I have lifted the playfield and closed the door just so I could get a look at the metal plate position. I am fairly certain the switches are engaged. I thought this might be a ground issue but I would expect that the high power would indeed be turned off, if that were the case, but all of the solenoids fire as usual.
The same symptoms were happening to me, drove me crazy!!
Sounds like you are having the same problems. If its the same socketed chip (u20) on the CPU board it's an easy fix.
You're currently viewing posts by Pinsider castro28.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/coin-door-open-message-on-dmd-during-game-play?tu=castro28 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Abington, MA
Hamilton, ON