Terminator 2: Judgment Day
Williams, 1991Can anyone confirm my wiring between a C220 and WPC Interface board?
There’s absolutely nothing online re. this.
At a guess I’d say…
Acc.1,2,3 (on the mech) connect to Coin 1,2,3 (on the board)
Inh 1,2,3,4,5… connects to Enable coins 1,2,3,4,5….
Does Acc.4 then also connect to Key? Or leave these two disconnected?
If anyone can confirm this is correct, that would be great!
Wow, lengthy, detailed post ... but you're in the wrong forum. Go back and go to SS.
Wrong forum, but no.
The acceptor's "Acc" lines are the coin lines. Those go to WPC's Coin 1-3.
Hook up those, +12v and GND.
That's it.
The COM and Sel are for MDB connection, which WPC games *do not support*.
Quoted from Coyote:Wrong forum, but no.
The acceptor's "Acc" lines are the coin lines. Those go to WPC's Coin 1-3.
Hook up those, +12v and GND.
That's it.
The COM and Sel are for MDB connection, which WPC games *do not support*.
Thanks for the answer mate, that's great.
Thought an electronic coin mech would be electro mechanical... go figure, guess I'm in the wrong forum. Thanks anyway.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/coin-controls-c220-wpc-interface-wiring-help and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Darwin
Springfield, MA