You're currently viewing posts by Pinsider fatality83.
Click here to go back to viewing the entire thread.
I have a rescue 911 that has a coil sleeve that appears to have melted inside the coil. I noticed when I first got the game, the one pop bumper top would not push down like it is supposed to. I pulled the coil off and saw a piece of melted plastic inside. The coil is showing 5.9 ohms. Do I need to get a new coil or can I save it if I can get the sleeve out somehow?
Ok i will try replacing the coil just to be safe. I am not sure why the coil failed, I got it that way. I replaced two transistors in the driver board that were bad, maybe one was for that pop bumper. the fuse was also missing so I assume it locked on and burnt up but I will have to check the circuit for it. The game has seen better days so anything is possible I guess
You're currently viewing posts by Pinsider fatality83.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/coil-sleeve-melted?tu=fatality83 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Manchester, PA