(Topic ID: 245951)

Willy Wonka 1.33 code update available! Jan 30, 2020. See post 27

By Jasontaps

4 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

Topic Gallery

View topic image gallery

1.33JJ.jpg
72039108_2837539739597937_2398809191243317248_n.jpg
69782782_2758396097512302_3873601734060277760_n.jpg
69347832_445864146011664_4111678424181899264_n.jpg
67500550_2664312693587310_9203125642625810432_n.jpg
66335644_2648261295192450_3279852892281896960_n.jpg

#1 4 years ago

SEE POST 27 for latest info - January 2020

Just released:
New Delta upgrade for #Wonka pinball which includes various bug fixes and improvements! Version 1.08 can be installed over V1.06 and V1.07.

Change Log: https://tinyurl.com/yyr8d8dj

Download here: https://tinyurl.com/y42xzp8x
66335644_2648261295192450_3279852892281896960_n.jpg66335644_2648261295192450_3279852892281896960_n.jpg

#2 4 years ago
Quoted from Jasontaps:

#Wonka owners: Once you receive your game, please make sure you have the latest software version installed! Version 1.07 is a "delta" upgrade and can be installed over V01.04 and V01.06.
For the full change log: http://marketing.jerseyjackpinball.com/…/wonka_changelog.txt
To download: http://marketing.jerseyjackpinball.com/…/wonka_update_0107.…
Questions on downloading code? Email: [email protected][quoted image]

Jasontaps Your links are broken

#3 4 years ago
Quoted from DeeGor:

jasontaps Your links are broken

My bad. Links corrected.

#4 4 years ago

I like that in attract mode, the camera will detect movement and trigger a response. Walk past and it comes to life!

2 weeks later
#5 4 years ago

Happy to see new code update this fast! 7-11-19

#6 4 years ago
Quoted from Jasontaps:

Happy to see new code update this fast! 7-11-19

Any good stuff to report?

#7 4 years ago
Quoted from romulusx:

Any good stuff to report?

I am at work. Wont get to install it until later this evening.
This is the list of changes:

* Corrected a potential game hangup during Gobstopper Multiball restart.
- Attract mode motion detected speech is now enabled by default.
* Various bug fixes and improvements.

#8 4 years ago

They also stealth synced up all of the video and audio. This was a known bug.

(J/K)

#9 4 years ago

Since this is a Delta upgrade, follow these directions:

http://marketing.jerseyjackpinball.com/general/install-delta/

#10 4 years ago

Bump for a different crowd. And don't forget to get your free slurpee at 7-Eleven today !

1 week later
#11 4 years ago

There's a new #Wonka pinball code update available for download now! Version 1.09 is a Delta upgrade and can be installed over V1.06, V1.07 and V1.08.

For the full change log: http://marketing.jerseyjackpinball.com/ww/wonka_changelog.txt

To download: http://marketing.jerseyjackpinball.com/ww/wonka_update_v01.09.zip

Questions on downloading code? Email: [email protected]

67500550_2664312693587310_9203125642625810432_n.jpg67500550_2664312693587310_9203125642625810432_n.jpg
#12 4 years ago
Quoted from Jasontaps:

There's a new #Wonka pinball code update available for download now! Version 1.09 is a Delta upgrade and can be installed over V1.06, V1.07 and V1.08.
For the full change log: http://marketing.jerseyjackpinball.com/ww/wonka_changelog.txt
To download: http://marketing.jerseyjackpinball.com/ww/wonka_update_v01.09.zip
Questions on downloading code? Email: [email protected][quoted image]

== Game Code

* Adjusted Gobstopper lockup release coil pulse to try and make it more
forgiving of differences in line voltage.
+ Added a Wonkavator test.
* Fixed a bug in the computer award ticket display logic that could cause
the game to crash.

#13 4 years ago

Question about this:

* Adjusted Gobstopper lockup release coil pulse to try and make it more
forgiving of differences in line voltage.

Does this mean that we should dial back our Gobstopper and VUK coil settings if we had to change them to make the lock release work? (Mine are bumped to 20 on both, which was the only way to get it to consistently work.)

#14 4 years ago

No, that does not mean that you should dial them back

3 weeks later
#15 4 years ago

Thursday just got a whole lot sweeter! JJP just released a new code update for Willy Wonka and the Chocolate Factory pinball!
Version 1.10 is now available for download This is a "delta" upgrade, which can be installed over V01.06/V01.07/V01.08 and V01.09.

For the full change log: https://bit.ly/2YQV6wp
To download: https://bit.ly/31KNDfl

Questions on downloading code? Email: [email protected]
69347832_445864146011664_4111678424181899264_n.jpg69347832_445864146011664_4111678424181899264_n.jpg

#16 4 years ago

==============================================================================
== Jersey Jack Pinball, Inc. ==
== Presents ==
== Willy Wonka and the Chocolate Factory ==
==============================================================================
== http://www.jerseyjackpinball.com/ ==
== Facebook: http://www.facebook.com/JerseyJackPinball ==
== Support Portal: http://support.jerseyjackpinball.com ==
== Company Twitter: @JJPinball ==
== Software Department Twitter: @JJPSoftware ==
==============================================================================
== Copyright � 2018-9 Jersey Jack Pinball, Inc. ==
==============================================================================

Comments, questions, and/or bug reports? Ask @JJPSoftware, which is monitored
and responded by humans.

Issues with your game?
Please open a ticket: http://support.jerseyjackpinball.com

==============================================================================
== Legend ==
==============================================================================

+ Addition * Change/bugfix - Note

==============================================================================
== Version 01.10 August 14, 2019 ==
==============================================================================

- NOTE: This is a "delta" upgrade, which can be installed over V01.06 &
V01.07 & V01.08 & V01.09.

=== Game Code

+ Added a ramp diverter test.
* Added a cooldown to the upper left magnet so it doesn't fire too much and
get too hot.
* Updated custom message page in attract mode.
+ Added support for SE and CE toppers.
* Improved TV VUK eject handling.
* Added/updated music, sound, speech, graphics, and lamp effects.

=== Core Code

* Trough settle time reduced to 1/2 second.
* Autoplunger settle time reduced to 1/4 second on close, kept at 1 second on open.
* Added "Player Addable" adjustment. Can be set to BEFORE LAST BALL or ALWAYS.
This controls when you may add a player to the current game in progress in a
game set to "BALLS IN RESERVE." The default is BEFORE LAST BALL, which means
as soon as someone starts a ball and has none left, no more players may be
added to the game.
* Fixed sensing of headphones plugged in at power up.

1 week later
#17 4 years ago

When I installed this I ran into immediate issues.
1.08 - 1.13 .

I no longer have any "Menu" options. If I hit Enter it cycles through the "Unix" or OS menu.

So now I can no longer do anything.

Anyone know how I can fix this mess?

#18 4 years ago
Quoted from TechnicalSteam:

Anyone know how I can fix this mess?

Read my response to your other post.

LTG : )

1 week later
#19 4 years ago

Skip will be streaming the new 1.14 beta code on @jerseyjackpinball’s Willy Wonka tonight at 8 p.m. Eastern!

twitch.tv/buffalopinball

#pinball #twitch #willywonka
69782782_2758396097512302_3873601734060277760_n.jpg69782782_2758396097512302_3873601734060277760_n.jpg

#20 4 years ago

Still live right now

https://m.twitch.tv/buffalopinball

Added over 5 years ago:

Link expired. Podcast over.

Added over 5 years ago:

Link expired. Live cast over.

1 month later
#21 4 years ago

https://www.jerseyjackpinball.com/support/

== Legend ==
==============================================================================

+ Addition * Change/bugfix - Note

==============================================================================
== Version 01.25 October 7, 2019 ==
==============================================================================

- NOTE: This is a "delta" upgrade, which can be installed over V01.06 &
V01.07 & V01.08 & V01.09 & V01.10 & V01.12 & V01.13 & V01.14.

=== Game Code
+ Added Wonka Bar Ransom mode at 200 bars
+ Added golden bonus levels at 300 & 400 Wonka bars
+ Added Golden Ticket difficulty adjustments for all tickets
+ Added speech in various places
* Small tweaks to Wonka's Office rule & scoring
* Updated 3rd golden ticket choreo
* 2X Wonka Bars now will award 2 bars per spin on one time super spinner shots
* Increased scoring for Dots! Dots! Dots!, Slugworth Multiball
* Updated Wonkavator Multiball scoring
* Increased hurry up time for Violet and Augustus
* Updated motion detection attract mode logic
* Corrected a rare potential crash in Kid Multiball
* Fixed a bug where Computer Award Modes didn't pause timers correctly
* Various other bug fixes and improvements
+ Updated game to handle a coin-op preset setup
- NOTE: The below changes apply *ONLY* when installing coin-op preset
(via the standard coin-op preset or the new operator shortcut)
- Easier Gobstopper Multiball
- Wonka Bars do NOT reset ever
- Scrumdidilyumptious is no longer a combo rule until its completed once
- Kid Multiball stays lit all the time even after drain
- All Factory Tour Modes start game 1 hit away from being qualified
- Super X Qualifying shots now include the center loop shot
- 1 Super Lock is lit at Game Start
- Computer Award Modes are added to computer sooner

=== Core Code
+ Updated top level menu with new operator setup shortcut
- NOTE: this setup changes the rules slightly for a casual pinball audience

72039108_2837539739597937_2398809191243317248_n.jpg72039108_2837539739597937_2398809191243317248_n.jpg
#22 4 years ago

Another code update for Wonka??? #wherestheJJPOTCcodeupdate

...I know, I know....'It's coming.'

#23 4 years ago

Now v1.26 is up. Loaded it tonight - looks great!

3 weeks later
#24 4 years ago

I just did the update and have a black screen. Followed all the instructions (own WOZ and Hobbit) update was successful and informed to restart the game. On restart jersey jack logo comes up and then fade to black - nothing else but black.

#25 4 years ago
Quoted from badbilly27:

I just did the update and have a black screen. Followed all the instructions (own WOZ and Hobbit) update was successful and informed to restart the game. On restart jersey jack logo comes up and then fade to black - nothing else but black.

I'd try again. If you downloaded from USA Mirror, try the EU Mirror. USB 2, 8GB to 16GB.

If this is a delta update, be sure you have the correct full install in, not a lower number one.

Splash screen is the motherboard booting up, not seeing the hard drive/update.

LTG : )

1 week later
#26 4 years ago

All good. Full reinstall worked.

2 months later
#27 4 years ago

Change Log:
https://tinyurl.com/yyr8d8dj

Download here:
https://www.jerseyjackpinball.com/support/

==============================================================================
== Jersey Jack Pinball, Inc. ==
== Presents ==
== Willy Wonka and the Chocolate Factory ==
==============================================================================
== http://www.jerseyjackpinball.com/ ==
== Facebook: http://www.facebook.com/JerseyJackPinball ==
== Support Portal: http://support.jerseyjackpinball.com ==
== Company Twitter: @JJPinball ==
== Software Department Twitter: @JJPSoftware ==
==============================================================================
== Copyright � 2018-9 Jersey Jack Pinball, Inc. ==
==============================================================================

Comments, questions, and/or bug reports? Ask @JJPSoftware, which is monitored
and responded by humans.

Issues with your game?
Please open a ticket: http://support.jerseyjackpinball.com

==============================================================================
== Legend ==
==============================================================================

+ Addition * Change/bugfix - Note

==============================================================================
== Version 01.33 January 28, 2020 ==
==============================================================================

- NOTE: This is a "delta" upgrade, which *MUST* be installed over V01.31 or
V01.32.

=== Game Code
* Fixed bug where game could lock up during Victory Laps of Wonkavator
Multiball.
* Fixed bug in Wonkavator Multiball where if you got both locks for Super
Jackpot at nearly the same time, the shot for Super Jackpot would be lit
but one ball would still be released from the Gobstopper Device.
* Fixed bug in Wonkavator Multiball where you may not end Multiball if you
drain all the balls while the ballsaver is in grace.
* Gobstopper VUK kickout will now fire softer. It will now increase kick strength on retries. This is now
persistent after failures are detected.
* Added v1.0 of the Operator Manual.

1.33JJ.jpg1.33JJ.jpg

3 weeks later
#28 4 years ago

Ok what the heck am I doing wrong. Using a good usb stick, reformatted it. Loaded the code onto the stick using the method they direct you to on the site. Looks like it’s in the usb stick. Plug into pin and it reads it then restarts and it’s the same old (1.26) code.

Ideas? Thanks

EDIT: I figured it out. I stopped using that ubootin tool they suggest and just extracted zips directly to the usb.

Edit edit: Well, it said update complete and the game stayed in attract mode for a while and then crashed. When it rebooted it couldnt find any of the files. I think I need a full install...

Promoted items from the Pinside Marketplace
From: $ 649.95
Lighting - Led
Pin Stadium Pinball Mods
Led
$ 8.00
Cabinet - Other
Side Gig Studios
Other
From: $ 210.00
$ 25.50
Playfield - Protection
ULEKstore
Protection
$ 15.00
Playfield - Plastics
Travahontas Mods
Plastics
From: $ 12.00
Flipper Parts
Precision Pinball prod.
Flipper parts
$ 52.99
Cabinet - Shooter Rods
Pinball Shark
Shooter rods
7,500 (OBO)
Machine - For Sale
Satellite Beach, FL
$ 24.25
Playfield - Toys/Add-ons
The MOD Couple
Toys/Add-ons
$ 15.00
Cabinet - Sound/Speakers
Gweem's Mods
Sound/Speakers
$ 18.95
Playfield - Toys/Add-ons
ULEKstore
Toys/Add-ons
$ 30.00
Cabinet - Other
Rocket City Pinball
Other
From: $ 5.00
Cabinet - Other
Pin Monk
Other
$ 89.00
Playfield - Toys/Add-ons
The MOD Couple
Toys/Add-ons
$ 100.00
Boards
Led Pinball
Boards
$ 29.95
Playfield - Toys/Add-ons
ULEKstore
Toys/Add-ons
$ 18.00
Playfield - Protection
Volcano Pinball
Protection
$ 12.00
Tools
Nezzy's Pinball Prints
Tools
$ 399.95
Lighting - Led
Pin Stadium Pinball Mods
Led
$ 44.99
Cabinet - Shooter Rods
Pinball Shark
Shooter rods
7,700
Machine - For Sale
Elkhart, IN
$ 10.00
Cabinet - Other
Filament Printing
Other
From: $ 5.75
Playfield - Other
Rocket City Pinball
Other
$ 43.00
Playfield - Toys/Add-ons
The MOD Couple
Toys/Add-ons
$ 99.95
Cabinet - Shooter Rods
Hookedonpinball.com
Shooter rods
From: $ 399.95
Lighting - Led
Pin Stadium Pinball Mods
Led
$ 49.99
Cabinet - Toppers
Lighted Pinball Mods
Toppers
$ 3.75
Playfield - Protection
Pinball Mod Co.
Protection
$ 125.00
Cabinet - Shooter Rods
Super Skill Shot Shop
Shooter rods
Great pinball charity
Pinball Edu

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/code-update-available-to-willy-wonka-6-25 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.