(Topic ID: 72252)

Club Spidey (Spider-Man) - Members and guests welcome


By TimeBandit

5 years ago



Topic Stats

  • 1,509 posts
  • 226 Pinsiders participating
  • Latest reply 1 day ago by lyonsden
  • Topic is favorited by 89 Pinsiders

You

Linked Games

Topic poll

“Club Spidey (Spider-Man) - Members and guests welcome”

  • Spider-Man is the best Stern Pin 41 votes
    22%
  • Spider-Man is the best Super Hero Pin 102 votes
    54%
  • Black Spider-Man is Shiny 46 votes
    24%

(Multiple choice - 189 votes by 174 Pinsiders)

Topic Gallery

There have been 435 images uploaded to this topic. (View topic image gallery).

spidey (resized).JPG
IMG_20191108_174353 (resized).jpg
IMG_20191108_174232 (resized).jpg
IMG_20191108_172229 (resized).jpg
IMG_20191108_172215 (resized).jpg
IMG_20191108_172107 (resized).jpg
IMG_20191108_171913 (resized).jpg
20191108_060409.jpg
20191108_060210.jpg
20191108_055325.jpg
20191108_055253.jpg
IMG_20191108_133347 (resized).jpg
Screen Shot 2019-11-07 at 12.33.36 PM (resized).jpg
7F2AC4FF-9A73-451B-B13A-B0DC29E1E92F (resized).jpeg
FC0C3812-E3AC-49A6-9A4C-4F5FB93C2CA2 (resized).jpeg
dougspidey2 (resized).JPG

There are 1509 posts in this topic. You are on page 30 of 31.
#1451 41 days ago

Thanks for the replies guys, I will give it a shot. I guess I will do it without the led ocd for now and I can add it later if I don’t like how it turns out.

#1452 40 days ago
Quoted from JRay23:

Thanks for the replies guys, I will give it a shot. I guess I will do it without the led ocd for now and I can add it later if I don’t like how it turns out.

If helpful, I am shopping an SM out and when it came to GI, sunlight, frosted white LEDs were the winner when comparing all three types of white LEDs. There are pictures in that thread: https://pinside.com/pinball/forum/topic/professor-pinball-putting-spidey-back-into-an-sm#post-5223497

Here is a link to the LEDs at Comet: https://www.cometpinball.com/products/2smd-bulbs-25-packs

Screen Shot 2019-10-03 at 6.09.45 AM (resized).png
-2
#1453 40 days ago

Leaving the Spiderman club this week as i have swapped for a Pinball Magic. Just could never grow to love the game or post a half decent score. Machine has been at mine for a couple of months and no-one has gotten onto the high score board here.

#1454 40 days ago

Sorry to see you leave the club but happy someone new will be joining. I left the club twice before realizing this is a top 2 pin for me.

#1455 40 days ago

May just be that i'm too inexperienced to tune it properly but have tried adjusting the playfield angle up and down, leveling and cleaning and waxing.

#1456 40 days ago
Quoted from punkin:

Leaving the Spiderman club this week as i have swapped for a Pinball Magic. Just could never grow to love the game or post a half decent score. Machine has been at mine for a couple of months and no-one has gotten onto the high score board here.

I feel a lot like this, and I love Spidey, not so much the gameplay. It’s ok, but my 6 year old boy won’t let me sell it.

#1457 39 days ago

Got a couple docs for exchange if any interest. 120.00 with exchange. Works on 2007 or 2010 original. Not for vault edition. PM if interested. Thanks. Will do market add but wanted to mention club first.

321354d9056733b0a6eeda97315ca667bf6e3e0e (resized).jpg
#1458 39 days ago
Quoted from lyonsden:

If helpful, I am shopping an SM out and when it came to GI, sunlight, frosted white LEDs were the winner when comparing all three types of white LEDs. There are pictures in that thread: https://pinside.com/pinball/forum/topic/professor-pinball-putting-spidey-back-into-an-sm#post-5223497
Here is a link to the LEDs at Comet: https://www.cometpinball.com/products/2smd-bulbs-25-packs[quoted image]

Awesome, thanks for the tip. I just read through the linked post. Now I have to figure out how to do those addressable LEDs after watching that youtube video you made. That was incredible.

#1459 39 days ago

biglaw pm on Dock Ock

#1460 39 days ago
Quoted from JRay23:

Awesome, thanks for the tip. I just read through the linked post. Now I have to figure out how to do those addressable LEDs after watching that youtube video you made. That was incredible.

Glad you like that and I can't wait to finish the programming for addressable LEDs in SM. That is a replacement of the GI and if you are interested in doing that, send me a PM. Happy to chat about what it takes to do.

#1461 36 days ago

Just when I thought my pimped spidy was done, I found a Matt Mckee topper and Big Laws three lighted figures! At least my son and I got to put a few hours playing before removing the figures to be modded. I will post pics when completed.

1 week later
#1462 28 days ago

What is the best side art/blades for original Spider-Man?

#1463 28 days ago
Quoted from jorge5240:

What is the best side art/blades for original Spider-Man?

mirror blades

#1464 28 days ago
Quoted from jorge5240:

What is the best side art/blades for original Spider-Man?

For something more custom looking, I like the mirror blades made by Tilt Graphicd

20191015_115247 (resized).jpg
#1465 28 days ago

I like the city scape as it mattches the backboard

1AC2028B-B848-4A53-A20C-F6E41F0F4AC0 (resized).jpegC5022886-5032-4983-8073-862387EDDAA4 (resized).jpeg
#1466 28 days ago
Quoted from shovelhed:

I like the city scape as it mattches the backboard[quoted image][quoted image]

Where are these available at?

#1467 28 days ago

How are you guys dealing with Doc Ock Rejects? Bending the back bracket down a bit? I have a Cliffy on the Doc's hole.

#1468 28 days ago
Quoted from FatPanda:

How are you guys dealing with Doc Ock Rejects? Bending the back bracket down a bit? I have a Cliffy on the Doc's hole.

First, make sure the magnet is not causing the ball to get airborne and hit the blue foam when doc ock is up positioned. If the magnet is not level with the playfield it will cause this. Then put drop dead foam in the back. If that does not solve it then look to possibly bend down on the bracket a little. You should not get any bounceouts if it is right.

#1469 28 days ago
Quoted from DCFAN:

First, make sure the magnet is not causing the ball to get airborne and hit the blue foam when doc ock is up positioned. If the magnet is not level with the playfield it will cause this. Then put drop dead foam in the back. If that does not solve it then look to possibly bend down on the bracket a little. You should not get any bounceouts if it is right.

I'll check all of these things. I get rejects on medium to fast shots and it can be frustrating when I'm combing and want to nail the Doc shot but it comes screaming out.

#1470 28 days ago
Quoted from shovelhed:

I like the city scape as it mattches the backboard[quoted image][quoted image]

I've never seen those. They really pop!

#1471 28 days ago
Quoted from Jaeg:

For something more custom looking, I like the mirror blades made by Tilt Graphicd[quoted image]

Do you have a full shot of your play field with these side blades? I am interested in getting these for my SM.

#1473 28 days ago

Here you go

5E3C61B8-883B-4510-9C63-FFD6AE6E18FF (resized).jpeg
#1474 28 days ago

Awesome! Thanks

#1475 28 days ago
Quoted from FatPanda:

How are you guys dealing with Doc Ock Rejects? Bending the back bracket down a bit? I have a Cliffy on the Doc's hole.

Do you have a Cliffy on the magnet in front of Doc? If so, just put a small piece of mylar in front of it so it's not a big bump for the ball to bounce up and hit the blue rubber on Doc.

#1476 28 days ago
Quoted from Palmer:

Do you have a full shot of your play field with these side blades? I am interested in getting these for my SM.

It's not a great picture but hopefully it gives you an idea of how they look

20191015_190505 (resized).jpg
#1477 28 days ago
Quoted from Supersquid:

Do you have a Cliffy on the magnet in front of Doc? If so, just put a small piece of mylar in front of it so it's not a big bump for the ball to bounce up and hit the blue rubber on Doc.

I've done that already

1 week later
#1478 20 days ago
Quoted from FatPanda:

How are you guys dealing with Doc Ock Rejects? Bending the back bracket down a bit? I have a Cliffy on the Doc's hole.

When I owned my original, a bit of drop dead foam and a small tweak got it 100%. Now with my vault, I couldn't get it for the life of me. Tried bending, foam (multiple types), checking the magnet level, etc and no matter what it was rejecting nearly 50% of shots. Almost made me light it on fire. Finally determined it was the factory "cliffy" they added to the hole for the vault. Even with how thin it is, it was just enough to get the ball to hop. I ended up taking that off, adding a thin strip of mylar in its place (probably not needed at home), and it's been about 95% good since. I will still get one to hop out once in a great while, but it's rare.

#1479 20 days ago
Quoted from Jediturtle:

When I owned my original, a bit of drop dead foam and a small tweak got it 100%. Now with my vault, I couldn't get it for the life of me. Tried bending, foam (multiple types), checking the magnet level, etc and no matter what it was rejecting nearly 50% of shots. Almost made me light it on fire. Finally determined it was the factory "cliffy" they added to the hole for the vault. Even with how thin it is, it was just enough to get the ball to hop. I ended up taking that off, adding a thin strip of mylar in its place (probably not needed at home), and it's been about 95% good since. I will still get one to hop out once in a great while, but it's rare.

I would say 50% of straight fast shots reject for me. I'll try adding a "step" with mylar in front of the Cliffy if the other workarounds don't help.

#1480 20 days ago
Quoted from FatPanda:

I would say 50% of straight fast shots reject for me. I'll try adding a "step" with mylar in front of the Cliffy if the other workarounds don't help.

Are you using the metal cliffy or the carbon fiber cliffy? The metal ones tend to lift up or sit higher.

#1481 20 days ago
Quoted from DCFAN:

Are you using the metal cliffy or the carbon fiber cliffy? The metal ones tend to lift up or sit higher.

I'm pretty sure it's the metal cliffy. I added a piece of mylar to smooth the transition in front of the magnet, but not in front of the hole.

#1482 20 days ago
Quoted from FatPanda:

I'm pretty sure it's the metal cliffy. I added a piece of mylar to smooth the transition in front of the magnet, but not in front of the hole.

I was referring to the a magnet cliffy. I don’t think with SM a cliffy has been needed by many for the hole.
I recommend trying the carbon fiber cliffy for the magnet if you presently have a metal magnet cliffy there. You can tell the difference because the carbon fiber one is black.

#1483 20 days ago
Quoted from DCFAN:

I was referring to the a magnet cliffy. I don’t think with SM a cliffy has been needed by many for the hole.
I recommend trying the carbon fiber cliffy for the magnet if you presently have a metal magnet cliffy there. You can tell the difference because the carbon fiber one is black.

I'd have to take a look. I can't recall from memory. I'm pretty sure it's the metal one.

#1484 20 days ago

Zero percent bounce outs. Have fails prior to adding the Mylar in front of the carbon cliffy.

IMG20191024101557 (resized).jpg
#1485 17 days ago

A big shoutout biglaw for theses three bad ass figures he created. Finally finished my Spidy, I think its loaded and the nicest Ive seen or played. Just got done installing biglaws figures and the ultra rare Matt Mckee topper

1CFF6E55-0651-4909-9428-EF3054F46F36 (resized).jpeg6A8C880B-4745-432D-9639-17B5AB2DBCF4 (resized).jpeg026435DB-31E3-4566-B5C7-88E60F0BA8D2 (resized).jpeg9283D6E3-6E6E-4824-87AF-22D205B6B7CC (resized).jpegB713764B-0A8C-4519-955B-2F2CE10FD39C (resized).jpeg91D200DD-7947-46B9-962C-3D10B6162BC5 (resized).jpegEC2CFADD-F221-4A0C-AD44-49DFC83F7B34 (resized).jpeg
#1486 17 days ago

Very nice! SM kicks ass. What speakerlight kit do you have in there?

#1487 17 days ago

Speaker light kits.com Hes the best!

1 week later
#1488 10 days ago

Another shout out to biglaw . These figures are incredible!

6136E968-B208-4076-810D-801C266DAAEC (resized).jpeg
#1489 10 days ago

Anyone have a tournament lockbar for sm with the hole they want to get rid of.

I know Marco has them FOR 69 bucks just looking for one cheaper as it seems most take them off.

LMK what ya have. THX

#1490 10 days ago

What is the best side art or art blades for a SM vault? I can't seem to find one that matches the art. Or should I just go with mirror blades.

#1491 10 days ago
Quoted from TimeBandit:

Tonight's SMVE Total Lightshow sponsored by..Mirror Blades! Pretty damn tasty.

What ever came of Total Lightshow for SM vault?

#1492 10 days ago
Quoted from marspinball:

What is the best side art or art blades for a SM vault? I can't seem to find one that matches the art. Or should I just go with mirror blades.

Tilt graphics

CE1574CD-FC29-46DA-926C-160F1D2E6362 (resized).jpeg1EDE73E4-F570-4151-9943-A2E0AA688044 (resized).jpeg

#1493 9 days ago
Quoted from hoby1:

Anyone have a tournament lockbar for sm with the hole they want to get rid of.
I know Marco has them FOR 69 bucks just looking for one cheaper as it seems most take them off.
LMK what ya have. THX

Here is a better alternative:

http://passionforpinball.com/tourney.htm

You don't want a tourney button on the lockdown bar where you are always bumping it on accident or having to disconnect, run the wire through the lockdown bar receiver just to remove the lockdown bar and then going through the reverse process to put the lockdown bar back on and reconnect the button. After having to resolder my tourney button wires for the second time I thought....."There has to be a better way!"....and there is: Add the button to your coindoor in it's own recessed hole and forget about the ongoing hassles of having the button on the lockdown bar and it's disconnecting and reconnecting hassle every time you want to remove the lockdown bar.

I'm not only an endorser..... I'm a partial inventor of it. Dougie's first mod idea and it's still on my Black Spider-Man to this very day.

Doug (SpeakerLightKits.com)
dougspidey2 (resized).JPG

#1494 9 days ago
Quoted from DugFreez:

Here is a better alternative:
http://passionforpinball.com/tourney.htm
You don't want a tourney button on the lockdown bar where you are always bumping it on accident or having to disconnect, run the wire through the lockdown bar receiver just to remove the lockdown bar and then going through the reverse process to put the lockdown bar back on and reconnect the button. After having to resolder my tourney button wires for the second time I thought....."There has to be a better way!"....and there is: Add the button to your coindoor in it's own recessed hole and forget about the ongoing hassles of having the button on the lockdown bar and it's disconnecting and reconnecting hassle every time you want remove the lockdown bar.
I'm not only an endorser..... I'm a partial inventor of it. Dougie's first mod idea and it's still on my Black Spider-Man to this very day.
Doug (SpeakerLightKits.com)
[quoted image]

Don't stern do this now anyway. I know they removed this button completely from my spidey which was in the last run

#1495 9 days ago
Quoted from embryon:

Don't stern do this now anyway. I know they removed this button completely from my spidey which was in the last run

Well they started adding a recessed square hole right under the start button for the tourney button in later SAM / SPIKE 1 games. On SPIKE 2 games they still have a hole for the tourney button under that start button, but it's not recessed....so it makes it so if you add the "classic" tourney start button on them.....they stick out and look like they shouldn't be there.

What Stern needs to do now is to make a low profile "Tournament Start" button that is made like their SPIKE 2 "Start" buttons. There is an ongoing discussion on that here:

https://pinside.com/pinball/forum/topic/stern-tournament-button-spike-system-2

Also.....I believe the tourney button was only included on Black Spider-Man from the factory.......and possibly Canadian or international games as it seems they still include them on Canadian games where the US games get the blank hole under the start button. Who knows how Canada negotiated this special treatment.

The games that have the cabinets made with the square, recessed holes under the start button seem to be the best solution in my opinion. What I never understood was when people with those style of games would deck out their games with hundreds of dollars of mods and not pay the $5 to add the tourney button to fill the ugly square hole that was made for it. Even if you don't hook it up.......it still looks better than a blank, black plug in a hole. Also....those tourney systems used to cost hundreds of dollars extra as an add-on item from Stern. Now they are built into the game system. You might as well spring the extra $5 for the button to have the option to use it.

#1496 9 days ago

Yes in Australia we get the button included as standard

#1497 8 days ago
Quoted from marspinball:

What ever came of Total Lightshow for SM vault?

Redshift sold his SM so I doubt it will be developed.

I've a Pinduino kit in my SMVE (https://pinside.com/pinball/forum/topic/pinduino-v03-interactive-control-of-leds/page/3#post-4331488)

Professor Pinball (lyonsden) is working on a revised kit (Pinduino) for SM & SMVE which includes the VUKs (web slingers).

https://pinside.com/pinball/forum/topic/professor-pinball-putting-spidey-back-into-an-sm

#1498 5 days ago

FILAMENT PRINTING SPIDERMAN COIN DOOR INSERT’s installed today. Impressed FC0C3812-E3AC-49A6-9A4C-4F5FB93C2CA2 (resized).jpeg7F2AC4FF-9A73-451B-B13A-B0DC29E1E92F (resized).jpeg

#1499 5 days ago

Does anyone have a spare Sandman target bank decal? I ordered one from PinballCustoms.com, but like many before me, I never received my decal
If you have a spare one laying around I would be very grateful! Thanks for your help.Screen Shot 2019-11-07 at 12.33.36 PM (resized).jpg

#1500 5 days ago
Quoted from HankScorpio:

Does anyone have a spare Sandman target bank decal? I ordered one from PinballCustoms.com, but like many before me, I never received my decal
If you have a spare one laying around I would be very grateful! Thanks for your help.[quoted image]

Contact pinballdecals and find out if they have it in stock. It is on their website:
https://www.pinballdecals.com/PartsByGamePages/Spiderman_Page.html#

Promoted items from the Pinside Marketplace
5,000 (OBO)
Machine - For Sale
Bentonville, AR
6,500
Machine - For Sale
Ropesville, TX
$ 48.00
Cabinet - Other
ModFather Pinball Mods
There are 1509 posts in this topic. You are on page 30 of 31.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside